Closed

BL18 In-Vacuum Undulator

Description: SLAC National Accelerator Laboratory invites proposals for a BL18 In-Vacuum Undulator under notice 367893(RE). It requires a U.S. domestic end-item source and instructs vendors to return the documentation specified in the attached RFP cover letter. Clarification requests were due September 25, 2026, and complete proposals are due October 16, 2026, at 5:00 p.m. PDT.

Buyer: Department of Energy
Federal · DC, US
Released: Sep 1, 2026
Closes: Oct 17, 2026(Closed)

Files

Original attachments and procurement documents tied to this bid.

Federal RFP files are for Starbridge customers only.

You can request RFP files from all other buyer types for free on this site.

Active alternatives to this closed RFP

These related opportunities are still open for bidding.

Air Force Life Cycle Management Center
FederalOH
Posted
Oct 14, 2026
Closes
Nov 13, 2026
Vacuum Turbo Pumps RFP
Operations: The TMPS is required to feature an integrated, oil-free, benchtop pumping system combining a turbomolecular high-vacuum pump, a dry scroll/backing pump, and an integrated system controller. The acquisition shall also contain a separate variable leak valve. The TMPS shall be a fully integrated, self-contained "plug-and-play" unit. The roughing and backing operations shall not require physical pumping or oil-sealed backing pumps to achieve high-vacuum operation. Users are expected to interact solely with the system's main interface or display panel during operation. The connection on the top of the pumping system shall be an ISO 100 Flange (ISO-LF DN 100). Range and Pumping Speed: The TMPS shall be capable of evacuating chambers and measuring pressure across the following parameters: The High-Vacuum Pump Speed shall be at least 215 L/s for Nitrogen; The Vacuum Pressure shall obtain a vacuum of 1*10^-9 mbar; The Compression Ratio for Nitrogen shall be greater than 1*10^-11. See attached file.
Naval Undersea Warfare Center (NUWC)
FederalDC
Posted
Oct 15, 2026
Closes
Oct 19, 2026
Vacuum Recovery Unit RFP
4 EA of 200HP Vacuum Recovery Unit (VRU); PIECE NO. PC-1 thru 4. 4 EA of VRU E-stop and cabling; PIECE NO. PC-5 thru 8. Vacuum Recover Unit (VRU): General Description of System: The equipment shall meet all the performance and construction characteristics herein. The equipment shall be portable and provide for full recovery of abrasive blast grit, which may be located up to 400 F away from the equipment. All values given are intended as the actual value, unless specified as a range, maximum or minimum. See attached file.
DLA Land
FederalOH
Posted
Oct 6, 2026
Closes
Oct 21, 2026
Vacuum Pump, Reciprocate - (Request for Quotation)
Provide vacuum pump, reciprocate, NSN 4310015629550, Qty 67 UI Ea
Township of Voorhees
CityNJ
Posted
Oct 13, 2026
Closes
Oct 27, 2026
Hook Lift Mounted Leaf Vacuum RFP
Hook Lift Mounted Leaf Vacuum.

Key Contacts on this RFP

Decision makers connected to this RFP from Department of Energy.

Matthew DoveAssistant Inspector General for Office of Audits

*******@************

+1 (***) ***-****

James WolffAssociate Administrator for Information Management and Chief Information Officer (CIO)

*******@************

+1 (***) ***-****

Dawn ZimmerChief Information Officer

*******@************

+1 (***) ***-****

John E. DupuyChief Technology Officer

*******@************

+1 (***) ***-****

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts

Active alternatives to this closed RFP

These related opportunities are still open for bidding.

Air Force Life Cycle Management Center

FederalOH

Posted

Oct 14, 2026

Closes

Nov 13, 2026

Vacuum Turbo Pumps RFP

Operations: The TMPS is required to feature an integrated, oil-free, benchtop pumping system combining a turbomolecular high-vacuum pump, a dry scroll/backing pump, and an integrated system controller. The acquisition shall also contain a separate variable leak valve. The TMPS shall be a fully integrated, self-contained "plug-and-play" unit. The roughing and backing operations shall not require physical pumping or oil-sealed backing pumps to achieve high-vacuum operation. Users are expected to interact solely with the system's main interface or display panel during operation. The connection on the top of the pumping system shall be an ISO 100 Flange (ISO-LF DN 100). Range and Pumping Speed: The TMPS shall be capable of evacuating chambers and measuring pressure across the following parameters: The High-Vacuum Pump Speed shall be at least 215 L/s for Nitrogen; The Vacuum Pressure shall obtain a vacuum of 1*10^-9 mbar; The Compression Ratio for Nitrogen shall be greater than 1*10^-11. See attached file.

Naval Undersea Warfare Center (NUWC)

FederalDC

Posted

Oct 15, 2026

Closes

Oct 19, 2026

Vacuum Recovery Unit RFP

4 EA of 200HP Vacuum Recovery Unit (VRU); PIECE NO. PC-1 thru 4. 4 EA of VRU E-stop and cabling; PIECE NO. PC-5 thru 8. Vacuum Recover Unit (VRU): General Description of System: The equipment shall meet all the performance and construction characteristics herein. The equipment shall be portable and provide for full recovery of abrasive blast grit, which may be located up to 400 F away from the equipment. All values given are intended as the actual value, unless specified as a range, maximum or minimum. See attached file.

DLA Land

FederalOH

Posted

Oct 6, 2026

Closes

Oct 21, 2026